SUZUKI LT-R450

shift pin bracket
1) DRAIN OIL
2) DRAIN COOLANT
3) REMOVE SHIFTER, THEN CIRCLIP ON GEARSHIFT SHAFT
4) REMOVE RIGHT SIDE COVER
5) REMOVE CLUTCH AND BASKET
6) REMOVE 2 PHILLIPS FLATHEAD SCREWS HOLDING DOWN FINGER
7) REMOVE 6MM NUT FROM GEARSHIFT CAM PLATE (DO NOT REMOVE PLATE) REPLACE WITH SUPPLIED NUT (BE SURE TO USE LOCKTITE)
8) SLIDE OUT SHIFT SHAFT
9) REMOVE GEARSHIFT ARM STOPPER (PIN) AND WASHER
10) INSTALL PIN INTO NEW BRACKET WITHOUT WASHER (LOCKTITE) FROM COUNTERBORED SIDE
11) REINSTALL SHIFT SHAFT(ALIGN GEARS CENTRALLY)
12) INSTALL BRACKET OVER SHIFT SHAFT AND USE SUPPLIED SCREWS (LOCKTITE)
13) NOW REVERSE STEPS 5 -1